STEPMOTION


Go to content

Z AXIS SLIDES ASSEMBLIES

CNC STORE

BackPlayNext

Z axis CNC for plasma 6" Travel Two Plasma Mounts with floating head 35MM torch



FOR THC ON YOUR Z AXIS PLASMA TABLE
SWITCH INCLUDED
SOME WIRING REQUIRED
A rigid coupling is supplied and is 0.250 at both ends.
For different rigid coupling shaft sizes please ask, its free.
Stepper motor not included.
The lead screw is Precision 3/8-12 Acme
ACETAL DelrinŽ NUT 3/8-12 ++ ANTI-BACKLASH ++ Replaceable
4 Linear Ball Bearings
2X INDUCTION HARDEN PRECISION GROUND SHAFT (smooth movement with no scoring on shaft from ball bearing)
This Z axis is precision manufactured using aerospace Aluminum alloy 6061.
We carefully assembled using high grade fasteners .
Front plate is wider, for easy attachment to your gantry, free of holes.
Drill holes accordingly to your needs. We will drill holes for free just ask.
Back plate dimension 0.250"x 11.5"x 3.5"
Front plate dimension 0.250"x 3.0"x 4.5"
Lead screw is secure with a lock-nut, no axial play.
The assembly use anti-rust screws M5-0.8
***For use with Nema 23 stepper motor.***(not included)
(WEIGHT IS APPROX. 4.7 LBS WITH NO MOTOR)
EXPEDITE CANADA AND INTERNATIONAL SHIPPING WITH TRACKING





BUY OPTIONS
BUY OPTIONS

Z AXIS SLIDE CNC THC PLASMA FLOATING HEAD 4.75 " TRAVEL DIY HOBBY KIT NEW

This Z axis is precision manufactured using aerospace Aluminum alloy 6061.
We carefully assembled using high grade fasteners .
FOR THC ON YOUR Z AXIS PLASMA TABLE
SWITCH INCLUDED
SOME WIRING REQUIRED
A rigid coupling is supplied and is 0.250 at both ends.
For different rigid coupling shaft sizes please ask, its free.
Stepper motor not included.
The lead screw is Precision 3/8-12 Acme
ACETAL DelrinŽ NUT 3/8-12 ++ ANTI-BACKLASH ++ Replaceable
4 Linear Ball Bearings
2X INDUCTION HARDEN PRECISION GROUND SHAFT (smooth movement with no scoring on shaft from ball bearing)
This Z axis is precision manufactured using aerospace Aluminum alloy 6061.
We carefully assembled using high grade fasteners .
Front plate is wider, for easy attachment to your gantry, free of holes.
Drill holes accordingly to your needs. We will drill holes for free just ask.
Back plate dimension 0.250"x 8.75" x 3.5"
Front plate dimension 0.250"x 3.0" x 4.5"
Lead screw is secure with a lock-nut, no axial play.
The assembly use anti-rust screws M5
***For use with Nema 23 stepper motor.***(not included)
(WEIGHT IS APPROX. 4.8 LBS WITH NO MOTOR)
EXPEDITE CANADA AND INTERNATIONAL SHIPPING WITH TRACKING



Z AXIS SLIDE ++6" TRAVEL++ 4" WIDTH ++ CNC ROUTER,3D PRINTER,PLASMA,DYI



**6 INCH TRAVEL 4 " width
Z axis SLIDE for CNC Router, Plasma, 3D Printer, Automation Projects
FOR RELAIBILITY AND PERFORMANCE
SUPPORTED LEADSCREW ON BOTH ENDS
THE SLIDE SHAFTS ARE **SECURED BY CLUMPING**

THE ACME 3/8-12 LEADSCREW IS SUPPORTED AT BOTH ENDS
HIGHLIGHTS:
LOW PROFILE DESIGN
CNC MACHINED FOR HIGH PRECISION
2X INDUCTION HARDEN PRECISION GROUND SHAFT (smooth movement with no scoring on shaft from ball bearing)
4X LMU12 LINEAR BALL BEARINGS
FLEXIBLE COUPLING 0.250"
WILL ACCEPT MOTOR NEMA 23
SUPPORTED LEADSCREW ON BOTH ENDS
DELRIN ACME NUT ANTI-BACKLASH 3/8-12
PRECISION ACME LEADSCREW 3/8-12
WEIGHT 4.2 LBS WITHOUT MOTOR
ACETAL DelrinŽ NUT 3/8-12 ** ANTI-BACKLASH **

BACK PLATE HAS NO MOUNTING HOLES.
WE WILL DRILL MOUNTING HOLES AT YOUR REQUEST, FOR FREE.
It will accept Nema 23 size stepper motor

Back plate dimension 0.250" x 11.5"x 4"
Front plate dimension 0.250" x 3" x 4"
The assembly use anti-rust screws M5.
INCLUDED 4 SCREWS FOR MOUNTING YOUR NEMA 23 MOTOR
EXPEDITE SHIPPING WITH TRACKING No. FOR YOUR CONVENIENCE
WE SHIP WORLDWIDE
SEE PICTURES FOR DETAILS
***STEPPER MOTOR NOT INCLUDED***





BUY OPTIONS
Z AXIS SLIDE

Z AXIS SLIDE ++6" TRAVEL++3.5" WIDTH++ CNC ROUTER,3D PRINTER,PLASMA,DYI




DESCRIPTION

LOW PROFILE DESIGN
CNC MACHINED FOR HIGH PRECISION
2X INDUCTION HARDEN PRECISION GROUND SHAFT (smooth movement with no scoring on shaft from ball bearing)
LMU12 LINEAR BALL BEARINGS
FLEXIBLE COUPLING 0.250"
WILL ACCEPT MOTOR NEMA 23
SUPPORTED LEADSCREW ON BOTH ENDS
DELRIN ACME NUT ANTI-BACKLASH 3/8-12
PRECISION ACME LEADSCREW 3/8-12
WEIGHT 3.2 LBS WITHOUT MOTOR
ACETAL DelrinŽ NUT 3/8-12 ++ ANTI-BACKLASH ++ ($25 value)
BACK PLATE HAS NO MOUNTING HOLES.
WE WILL DRILL MOUNTING HOLES AT YOUR REQUEST, FOR FREE.
It will accept Nema 23 size stepper motor.
STEPPER MOTOR NOT INCLUDED
Back plate dimension 0.250" x 11.5"x 3.5"
Front plate dimension 0.250" x 3" x 3.5"
INCLUDED 4 SCREWS FOR MOUNTING YOUR NEMA 23 MOTOR
EXPEDITE SHIPPING WITH TRACKING No. FOR YOUR CONVENIENCE
WE SHIP WORLDWIDE
SEE PICTURES FOR DETAILS
***STEPPER MOTOR NOT INCLUDED***

$197

Z AXIS SLIDE ANTI-BACKLASH CNC ROUTER NEMA 23 MOTOR INCLUDED

WE HAVE 65MM (MAKITA),69MM (611 DEWALT),71MM (BOSCH COLT) AND 54MM (SPINDLE) MOUNTS
PICK YOUR CHOICE
BACK PLATE WILL MATCH THE MOUNT.
****NO EXTRA CHARGE***
Package contents:
Z axis CNC Router (spindle) mount of your choice
Drop plate.
Nema 23 stepper motor 0.250 shaft.
2 pulley @1 belt
You will get what you see in the pictures (Makita router not included)
Please see pictures for details

Description:
Z axis is our regular with belt mechanism.
This design eliminates the coupling.There is a adjustable belt mechanism, to tighten the belt to the stepper motor pulley.
To be used as a Z axis for CNC Router.
The slide is manufactured using strong aluminum 6061T.
The lead screw is Precision 3/8-12 Acme supported with bearings at both ends for rigidity.
ACETAL DelrinŽ NUT 3/8-12 ++ ANTI-BACKLASH ++
4 Linear Delrin Bearings are used to move the slide easily and smooth.
It will accept Nema 23 size stepper motor.
Back plate dimension 0.250"x A"x3.5"
Front plate dimension0.250"x3.5" x 3"
Distance between holes 1"(0.75"symmetrical from center)... Screws are M5-0.8 countersunk
0.5" from bottom and top
Lead screw is secure with a lock-nut 1/4x20, no axial play.
Rods are C1045 quality precision ground.
The assembly use anti-rust socket head cap screws M5-0.8
Leadscrew is machined flat to proper hold the timing belt pulley.
MAKITA ROUTER NOT INCLUDED
EXPEDITE SHIPPING WITH TRACKING No. FOR YOUR CONVENIENCE






Z AXIS SLIDE $279
BUY OPTIONS

Z AXIS CNC SLIDE ++ XCARVE ++ **6 " TRAVEL** ++ ANTI-BACKLASH ++



Note:
Z axis shown mounted on XCARVE machine 500mm.
Machine and stepper motor not included...only Z axis
(Please read package contents).

Leadscrew is acme 3/8-12, one start, as xcarve stock...no changes to your software settings.
Our axis is supplied with proven heavy duty leadscrew anti-backlash ...
replaceable (we have stock).
Bolted to xcarve plate with M5 screw and nut ...easy and more durable installation...
**6 INCH TRAVEL 3.5 " width
There is a adjustable belt mechanism, to tighten the belt to the stepper motor pulley.
The slide is manufactured using strong Aluminum 6061.
The lead screw is Precision 3/8-12 Acme supported with bearings at both ends for rigidity.
ACETAL DelrinŽ NUT 3/8-12 ++ Replaceable ANTI-BACKLASH++
4 Linear DelrinŽ Bearings are used to move the slide easily and smooth.
It will accept Nema 23 size stepper motor.
Back plate dimension 0.250" x 10.00"x 3.5"
Front plate dimension 0.250" x 4.2" x 3.5"
Low profile only 1.550" from front to back plate.
Lead screw is secure with a lock-nut,no axial play.
Rods are C1045 quality precision ground
The assembly use anti-rust socket head cap screws M5-0.8
Leadscrew is machined flat to proper hold the timing belt pulley.
We recommend that same for the shaft on stepper motor.
EXPEDITE SHIPPING WITH TRACKING No. FOR YOUR CONVENIENCE
PACKAGE CONTENTS:
1 Z AXIS with anti-backlash
1 BELT
2 PULLEY
1 TOP PLATE FOR ATTACHING THE STEPPER MOTOR
++BACK AND FRONT PLATE HAS HOLES PATTERN FOR XCARVE++
Note: Configuration of holes will be as print shows.
SEE PICTURES FOR DETAILS
***STEPPER MOTOR NOT INCLUDED***



Z AXIS SLIDE 7 "TRAVEL **4" WIDTH** HEAVY DUTY CNC ROUTER ,PLASMA 3D KIT DIY




Z AXIS SLIDE 7" TRAVEL **4 inch width** ++ ANTI-BACKLASH ++ CNC ROUTER, PLASMA
The slide is manufactured using strong Aluminum Alloy 6061.
The lead screw is precision machined and is supported with bearings at both ends for rigidity and is 1/2- 10 turns per inch.
Sliding shafts is HEAVY 5/8 precision ground
Back and front are sturdy 3/8 Al 6061 plates
Clearance for rigid coupling is:
Diameter 0.800
Length 1.200 max
Bore 0.250 both sides
Leadscrew is machined flat to proper hold the coupling.
4 OILITE BRONZE LINEAR bearings are used to move the slide easily and smooth.
It will accept Nema 23 size stepper motor (not included).
The package is supplied with 1 rigid coupling.
Use 4 screws (supplied) M5x0.8 to attach your Nema 23 motor to the slide.
Stepper motor not included.
Expedite Shipping with tracking for your convenience.




BUY OPTIONS
BUY OPTIONS

CNC Z AXIS SLIDE 15" TRAVEL SURFBOARD KIT CNC ROUTER DIY



Z AXIS SLIDE 15 "TRAVEL **4 inch width** ++ ANTI-BACKLASH ++ CNC ROUTER, PLASMA
The slide is manufactured using strong Aluminum Alloy 6061.
The lead screw is precision machined and is supported with bearings at both ends for rigidity and is Precision Acme 1/2-10.
Sliding shaft is 5/8 precision ground
Back and front plate is 3/8 Al 6061
Clearance for rigid coupling is:
Diameter 0.800
Length 1.200 max
Bore 0.250 both sides
Shaft is machined flat to proper hold the coupling.
4 OILITE BRONZE LINEAR bearings are used to move the slide easily and smooth.
It will accept Nema 23 size stepper motor (not included).
The package is supplied with 1 rigid coupling.
Use 4 screws (supplied) M5x0.8 to attach your Nema 23 motor to the slide.
Motor in the pictures not included.





CNC Z AXIS SLIDE 10 " TRAVEL ACTUATOR CNC ROUTER ,PLASMA 3D KIT DIY




Z AXIS SLIDE 10 "TRAVEL **4 inch width** ++ ANTI-BACKLASH ++ CNC ROUTER, PLASMA
It can be used for CNC Router, Plasma Cutter, 3D Printer, Automation Projects .
The slide is manufactured using strong Aluminum Alloy 6061.
The lead screw is precision machined and is supported with bearings at both ends for rigidity and is 1/2- 10 turns per inch.
Sliding shaft is 5/8 precision ground
Back and front plate is 3/8 Al 6061
Clearance for rigid coupling is:
Diameter 0.800
Length 1.200 max
Bore 0.250 both sides
Leadscrew is machined flat to proper hold the coupling.
4 OILITE BRONZE LINEAR bearings are used to move the slide easily and smooth.
It will accept Nema 23 size stepper motor (not included).
The package is supplied with 1 rigid coupling.
Use 4 screws (supplied) M5x0.8 to attach your Nema 23 motor to the slide.
Summer Free Shipping for a Limited Time
Motor in the pictures not included.


BUY OPTIONS

HOME | CNC STORE | CONTACT | LINKS | EBAY STORE | Site Map


Back to content | Back to main menu