Why we are using Belt System

Most builders have their product using Rack and Pinion construction...and they copy each other...
When we decided to start designing our product,we make the decision not to copy or incorporate any of the competition design.
Therefore we think that a sturdy belt design is strong enough for any of your hobby or commercial applications.

We also believe that the power and sturdiness of a system is not in heavy cuts ...but in smart programming,where dept of cut and speed are deciding factors.
Why make heavy cuts,when you can cut faster (feed) with smaller dept of cuts also faster RPM...so the system will have a balanced performance.

 

 Most importantly if you had the chance to listen to a rack and pinion system running you been surprised how noise is that system.
On the contrary belt system is quiet,yet powerful.
We use wide 20 mm belt mm pitch,the belt has wire in it, resulting a very strong and durable product.

 


1 comentario

  • Alex

    I really like your design,belt configuration has many uses…Laser cutting,Plasma cutting,Positioning machines…and many more…
    I will really like to incorporate in my build your Rails and Gantry.

Dejar un comentario

Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados

Espa√Īol es