]]>
We also believe that the power and sturdiness of a system is not in heavy cuts ...but in smart programming,where dept of cut and speed are deciding factors.
Why make heavy cuts,when you can cut faster (feed) with smaller dept of cuts also faster RPM...so the system will have a balanced performance.
Most importantly if you had the chance to listen to a rack and pinion system running you been surprised how noise is that system.
On the contrary belt system is quiet,yet powerful.
We use wide 20 mm belt mm pitch,resulting a very strong and durable product.
]]>
]]>
Gantry and Rails are shipped assembled with speed reducers, belt pulleys,idle pulleys,belt,belt tensioner and all necessary hardware.
This configuration allows for building yourself the table and to install Rails and Gantry to complete the machine.
Table can be constructed sturdy at your location being more advantageous to DIY...that way you save on materials,labor and finally the total cost of the build.
]]>
Connect embedded sensor with E-stop.
Connect floating sensor with a low voltage relay on/off.
Functionality:
The floating assembly is used to measure uneven flat surfaces.
The breakaway system is used to protect the tool used in case of a collision.
This product incorporate both:floating and breakaway system.
]]>