For Plasma 5.75" Travel 3" Width
Plasma Mount with Floating Head, will fit 1"3/8 (35mm) Torch.
1x Z AXIS FAST TRAVEL LEAD-SCREW 5.75" STROKE
1x FLOATING THC DEVICE BOLTED TO THE BACK PLATE (WILL TRIGGER A SWITCH)
1x MOTOR MOUNTING PLATE FITS NEMA 23 STEPPER MOTOR
1x 35MM TORCH HOLDER WITH NECESSARY MOUNTING SCREWS
(35MM TORCH SHOWN NOT INCLUDED,FOR REFERENCE ONLY)
**Please see pictures for details**
FOR THC ON YOUR Z AXIS PLASMA TABLE
SOME WIRING REQUIRED
*****MOTOR NOT INCLUDED*******
3.175 TURNS/INCH PRECISION GROUND LEAD SCREW
ACETAL Delrin® ++ ANTI-BACKLASH ++ Replaceable
4 Linear Bronze Bearings Oilite are used to move the slide easily and smooth.
Back plate dimension 0.250"x 10.250" x 3.00"
Mounting plate dimensions 2.5"x 4.0"x 0.25"
Lead screw is secure with a lock-nut, no axial play.
***For use with Nema 23 ****0.250"shaft.***
(WEIGHT IS APPROX. 3.8 LBS WITHOUT MOTOR)
EXPEDITE CANADA AND INTERNATIONAL SHIPPING WITH TRACKING
Floating Z axis ...(explained)
Sometimes we need to modify our CNC machine in order to achieve our machining goals as quickly and as efficiently as possible. CNC machines such as plasma, plotter cutters, lasers need mechanism that helps with measuring of material surface.
Good example of such modification is Floating Z axis.
The concept is pretty straight forward: Z axis has its own movable unit which is able to move when tool encounters with material surface.
Floating Z axis on a plasma machine is a safety feature that prevents any serious damage of your plasma torch, in case of hitting any obstacles on located on machine table.
For plotters and drag knife cutters, floating effect comes handy because it is much easier to apply pressure of the pen or knife onto material surface (paper, carton, vinyl etc) without the frustrating trial and error procedure.
Floating Z axis can also be used for measuring material top surface. In such case, floating z axis unit uses limit switch. When Z axis moves down towards the material, activated switch signals controller that surface of material was detected and zero work position of Z axis can be set.